Ender IO: Pressure Conduits

(Unofficial Ender IO Add-on / PneumaticCraft Integration)

Please scroll down for the Chinese Description. / 中文介绍请向下滑动查看。

---

🇬🇧 English Description

🛑 Requirements & Compatibility

• Loader: NeoForge (1.21.1)
• Dependencies: Ender IO, PneumaticCraft: Repressurized. (Please use the latest versions available).
• Optional Dependency: Jade (Highly recommended. Enables HUD info for conduit specs).
• Safe to Install: This mod can be safely added to existing worlds without corrupting your saves.

💎 Core Features

1. Three Tiers of Pressure Conduits

• Basic Pressure Conduit: Transfers 1,000 mL per operation, 7.0 bar max pressure limit.
• Reinforced Pressure Conduit: Transfers 3,000 mL per operation, 25.0 bar max pressure limit.
• Advanced Pressure Conduit: Transfers 6,000 mL per operation, 25.0 bar max pressure limit.
• Supports smooth, in-place upgrading by simply right-clicking a lower-tier conduit with a higher-tier one.

2. Ender Space Technology (Zero Volume)

• Unlike native pneumatic tubes, these conduits boast zero internal volume. They act as instant, lossless transmission brokers and are perfectly sealed, eliminating the massive pressurization delays typical of large pipe networks.

3. Thermodynamic Balancing

• Air transfer relies on a dynamic fluid algorithm strictly calculated by pressure differences and the volume of connecting containers. It effectively prevents pressure sloshing, over-pressurizing small machines, and ghost vacuums.

4. Overpressure Explosions

• If the pressure of a connected machine exceeds the conduit's maximum threshold, the specific conduit will realistically explode and be destroyed (This feature can be toggled off in the config file).

5. Full Ender IO Integration

• Shared Block Space: Can coexist with other types of Ender IO conduits (e.g., Power, Fluid, Item) within a single block space.
• Seamlessly supports 16 IO color channels for separated networks within the same block space.
• Fully responsive Redstone control modes for dynamic logistics management.
• 100% compatible with Conduit Facades.

6. Jade HUD Support

• Aiming at a conduit bundle will immediately display its detailed specs via Jade, including the Single Transfer Volume, Transfer Per Second, Network Tick Rate, and the highlighted Max Pressure limit.

📜 License & Modpack Policy

• Copyright (c) Saku_rain - ALL RIGHTS RESERVED
• Modpack Policy: You are completely free and warmly welcome to include this mod in your modpacks, provided they are hosted on official platforms (like CurseForge/Modrinth).

---

---

🇨🇳 中文介绍

🛑 前置要求与兼容性说明

• 运行环境: 1.21.1 (NeoForge)
• 必要前置: 末影接口 (Ender IO), 气动工艺 (PneumaticCraft: Repressurized)。
• 可选前置: Jade（强烈推荐，安装后可开启 HUD 信息显示）。
• 安全安装: 本模组可随时无缝加入现有的存档中，不会损坏存档数据。

💎 模组核心特性

1. 阶梯式的气压导管与平滑升级

• 基础气压导管: 1000 mL/次 传输量，承压极限 7.0 bar。
• 强化气压导管: 3000 mL/次 传输量，承压极限 25.0 bar。
• 高级气压导管: 6000 mL/次 传输量，承压极限 25.0 bar。
• 支持手持高级导管直接右键低阶导管进行原位替换升级。

2. 末影空间技术（闭环密封与零体积）

• 导管网络内部不占用任何体积。能够实现瞬时、无损且绝对密封的气压传导，彻底消除原版庞大管网带来的充气延迟。

3. 动态热力学压差平衡

• 底层传输逻辑严格按照两端端点容器的气压差与物理体积动态计算实际平衡量，有效防止两端气压反复震荡与幽灵负气压问题。

4. 超压防爆机制

• 如果相连机器内部的气压超过了当前气压导管的承压极限，导管将发生定向爆炸并被销毁（该爆破特性可在配置文件中关闭）。

5. 深度融入 EIO 本土体系

• 同方块空间共存: 完美继承 EIO 核心机制，可与 EIO 内部其他类型导管（如能量、流体、物品、红石等）在同一个方块空间内共存绑定。
• 独立频道隔离: 完美支持 16 色独立的输入/提取频道隔离。
• 红石自动化: 支持原生红石控制模式（激活/禁用/忽略），由玩家自动化掌控抽气时机。
• 完美兼容导管伪装板遮挡。

6. Jade 完美兼容

• 当准星对准导管束时，HUD 会直观呈呈现气压导管的“单次传输量”、“单秒传输吞吐量”、“传输频率”以及标红的“承压极限”。

📜 版权声明与整合包政策

• 版权所有 (c) Saku_rain - 保留所有权利 (ALL RIGHTS RESERVED)
• 整合包政策： 只要通过合规的官方平台（如 CurseForge 或 Modrinth）发布，非常欢迎各位作者将本模组加入到你们的整合包中。