PeterWolf’s Planes

1.0.6

• Clamp cockpit HUD speed and vertical speed to zero while the occupied plane is grounded, settled, and at idle power.
• Keep grounded idle physics in ground handling for a few ticks when contact flickers, preventing tiny client/server corrections from showing as movement.
• Restore the -12 degree ground pose only as a client visual for an empty, settled plane after the pilot exits.

1.0.5

• Remove the remaining -12 degree ground model pitch so the tail no longer jumps up and down when client ground contact flickers.
• Keep visual pitch tied only to the real flight pitch.

1.0.4

• Keep the physical/synced entity pitch at 0 degrees while taxiing on the ground.
• Move the -12 degree taildragger nose-up pose into client-only visual model interpolation.
• Reduce ground jitter caused by syncing a pitched vehicle pose while colliding with the ground.

1.0.3

• Smooth ground handling by keeping taxi movement horizontal instead of applying the nose-up pitch to the movement vector.
• Allow A/D rudder input to yaw the plane on the ground even while taxiing slowly or standing still.
• Stop recentering the pilot look direction while the plane is on the ground.

1.0.2

• Restore local client prediction for the pilot's plane so the aircraft visibly moves while the HUD reports speed.
• Restore neutral centering for flight controls by gently pulling the pilot look input back to center.
• Add in-flight pitch auto-leveling so pitch and roll settle back toward neutral when the pilot is not holding input.

1.0.1

• Smooth plane yaw by keeping flight physics server-authoritative and rendering interpolated yaw/pitch/roll on the client.
• Replace instant yaw/roll changes with damped angular rates, clamped input, smoother engine response, quadratic lift, and speed-dependent drag.
• Reduce redundant synced data updates for throttle, roll, and rudder.